Resurface the floor. Skip the demolition.
One seamless floor, wall to wall — with quiet, stone-like depth.
A seamless surface of granite and acrylic resin, trowel-applied with the strength of stone and the flex of resin — or Monolith, a water-permeable resin-bound stone surfacing, or Micromosaic, a value-engineered terrazzo. Installed over your existing tile or flooring in a remodel — no demolition, no tear-out — or straight onto new concrete. Interior rooms and exterior terraces, one continuous plane without grout lines. Get your complete material kit and price in under 60 seconds.
- Step 1Dimensions
- Step 2Finish
- Step 3Color or stone
- Step 4Sheen
- Step 5Protection
Price your complete floor system
Adjust the measurements - your kit and price update instantly.
Step 1Enter your dimensions
Measure the longest length and width of each space - rough feet are fine. We calculate the rest.
The largest rectangle of the space - an open-plan room, a terrace, a garage bay.
Run the same floor through connecting spaces - one continuous plane, no thresholds, no transitions.
Enter the combined area you plan to finish. We apply the material allowance automatically.
Step 2Pick your finish
Every finish takes any movement - calm and modern to boldly artistic. The trowel writes the pattern; the finish sets the grain.
Microterrazzo blend
White base, tintable with any of our colors - lighter shades keep the quartz visible.
Step 3Pick your color or stone
Twenty natural blends - the color lives in the stone itself. Your last step: pick it, and the kit is complete.
Pick your stone first
Then choose the color of the base below - the stone sets the field, the tint sets the tone.
See every blend at terrazzo-usa.com/monolith.
Pick your color next
The full standard palette - over 50 colors in warm, cool and earth tones.
Step 4Pick your sheen
Choosing Matte? Every matte build starts with Armourcoat Satin as its base coat - the satin base is still in your kit, so you can keep a satin sheen if you change your mind.
Exterior floors finish matte, always - sealed and topped with the certified Anti-Slip R-11 coat for sure footing in the open air.
Exterior and Micromosaic presets use a fixed matte finish. Monolith retains its natural stone finish without a sealer.
Step 5Pick your protection level
The level sets the thickness of the build: Maximum simply adds more material and sealer to your kit for harder-working surfaces. Nothing else changes.
Sheen is always matte - sealed and finished with the certified Anti-Slip R-11 topcoat.
The selected preset uses a fixed protection build.
In their words
“The anti-crack memory resin holds up every time — no hairline cracking, no callbacks, no touch-ups.”
“A seamless, jointless finish without concerns about underperformance or discoloration — durability and design, even in wet areas.”
“Our walls became one seamless, softly textured shell — the whole room reads as if carved from a single material.”
“On new builds it delivers a flawless, jointless finish that’s highly durable and crack-resistant — a reliable system that adds value across the board.”
“With over 10 years applying microtoppings, this is the strongest material I have used — a flawless, seamless finish every time.”
“Top-tier material with a true professional standard. Durable, seamless and built for long-term use.”
“A seamless, waterproof-ready surface with no grout lines — and the result has held up beautifully.”
A smarter way to renovate floors — without the tear-out.
Traditional floor replacements carry hidden costs: demolition and tear-out, subfloor repair, leveling, waste hauling, permit delays, and days of dust with rooms out of service. Cement-based microcement floors can install over tile too, but introduce their own risks — shrinkage cracking, efflorescence, color shift during cure. TERRAZZO GraniTech avoids both paths.
Percentage savings hold across markets. Labor rates differ between South Florida, New York, Los Angeles and Chicago, but the relative advantage stays consistent — and the patented granite + resin chemistry is what makes the over-tile install possible at all. Building new? The same system installs straight onto cured concrete and screeds — one material, wall to wall. Request a sample to feel the surface underfoot.
What you eliminate
The finishes
The hand writes the movement. The finish sets the grain.
Every TERRAZZO GraniTech finish arrives as a ready-to-use paste — and every one of them takes any movement. Troweled flat, it reads modern and mirror-calm. Moved loosely, it drifts like limewash. Worked boldly, it becomes artistic, sculptural texture. What you choose here is not the pattern — it’s the grain beneath it. The sealer sets the final note: matte, satin, or a subtle semi-gloss.
The surface
Depth built into the surface.
Color is the least of it. Beneath every movement your applicator writes, TERRAZZO GraniTech builds a dense, cement-free granite + resin body over your prepared floor — thin as a coin, sealed against water, engineered to carry furniture, footsteps and years of traffic without losing the pattern the trowel left. The pattern is yours. The permanence is built in.
The system
The floor build — over what you already have
-
SealerArmourcoat floor sealer Two coats in matte or satin. Exterior floors always finish with the certified Anti-Slip R-11 topcoat.
-
Final coatDecorative final coat Color, texture and movement live here.
-
Build coatsTwo build coats Two structural coats that even the plane and carry the finish. Fine finishes ride on a Medium base coat.
-
MeshFiberglass mesh Bedded over the primed surface — the reinforcement layer that carries the build through the wet zone.
-
PrimerEco Grip Quartz primer Keys the system into your prepared surface.
-
BaseYour existing floor or substrate Existing tile, stone or sound flooring — or cured concrete and screeds in new construction — clean, level and primed.
Project
Selected projects
Floors resurfaced over existing tile and poured on new builds — residences, restaurants and retail.
Questions
Frequently asked questions
Is TERRAZZO GraniTech a microcement alternative for floors?
Yes. It delivers the same seamless aesthetic with a granite-aggregate + acrylic resin matrix — more flexible than cement-based microcement floors, inherently water-resistant, and engineered for foot traffic.
Can it go over existing tile or flooring without demolition?
Yes. It’s applied in thin layers over properly prepared existing tile, stone or sound flooring — no demolition, no tear-out, no waste hauling. The floor you have becomes the base for the floor you want.
Can I use it in new construction?
Yes. In new construction or a full remodel it installs straight onto cured concrete, screeds or another code-compliant substrate — one material, wall to wall.
Is it durable enough for floors?
The granite-aggregate body with memory resin resists cracking and daily wear. Choose Standard protection for residential rooms, or Maximum for high-traffic and commercial spaces.
Is it slippery?
Interior floors finish in matte or satin rated for foot traffic. Exterior floors are always finished with the certified Anti-Slip R-11 matte topcoat.
What surfaces can it be applied to?
Existing tile, stone and cured concrete or screeds — properly prepared and primed.
Support
With you every step of the way
Dedicated support across the full project — from choosing the right system and preparing your surface to application, sealing and finishing details. We can also match you with a trained installer near you.
Schedule a consultation
