Remodel the kitchen. Keep everything underneath.
One seamless kitchen — counters, backsplash, walls and floors in a single surface.
A seamless surface of granite and acrylic resin — hand-troweled with the strength of stone, the flex of resin, and quiet, organic depth in every grain, from rustic to smooth to softly glossy. One system carries every surface: counters, backsplash, walls, ceilings, floors — even cabinetry and wood. Applied over the kitchen you have — tile, laminate, stone — nothing demolished, or straight onto new substrates. Get your complete material kit and price in under 60 seconds.
- Step 1Dimensions
- Step 2Finish
- Step 3Color or stone
- Step 4Sheen
- Step 5Protection
Price your complete kitchen system
Adjust the measurements - your kit and price update instantly.
Step 1Enter your dimensions
Build the kitchen surface by surface - start with the counters, add what the room needs. One system covers them all: the same materials, counter to ceiling.
Measure along the front edge - standard counters run about 24 inches deep.
Standard splashes run about 18 inches high - going full-height to the cabinets? Just raise the height.
Your full walls already include the backsplash - nothing is counted twice.
Continue the same surface underfoot - one plane, no thresholds. Cabinet and island footprints can stay in the math; they become extra margin.
The full envelope - all four walls and the ceiling, calculated from room dimensions. No need to subtract cabinets or openings.
Enter each surface separately so its correct recipe is used.
Enter the combined area you plan to finish. We apply the material allowance automatically.
Step 2Pick your finish
Every finish takes any movement - calm and modern to boldly artistic. The trowel writes the pattern; the finish sets the grain.
Microterrazzo blend
White base, tintable with any of our colors - lighter shades keep the quartz visible.
Step 3Pick your color or stone
Twenty natural blends - the color lives in the stone itself. Your last step: pick it, and the kit is complete.
Pick your stone first
Micromosaic dresses the floor - then choose the color of the base below. For counters and walls, build a second kit in Medium or Fine.
See every blend at terrazzo-usa.com/monolith.
Pick your color next
The full standard palette - over 50 colors in warm, cool and earth tones.
Step 4Pick your sheen
Choosing Matte? Every matte build starts with Armourcoat Satin as its base coat - the satin base is still in your kit, so you can keep a satin sheen if you change your mind.
Exterior and Micromosaic presets use a fixed matte finish. Monolith retains its natural stone finish without a sealer.
Step 5Pick your protection level
The level sets the thickness of the build: Maximum simply adds more material and sealer to your kit for harder-working surfaces. Nothing else changes.
Sheen is always matte - sealed and finished with the certified Anti-Slip R-11 topcoat.
The selected preset uses a fixed protection build.
In their words
“The anti-crack memory resin holds up every time — no hairline cracking, no callbacks, no touch-ups.”
“A seamless, jointless finish without concerns about underperformance or discoloration — durability and design, even in wet areas.”
“Our walls became one seamless, softly textured shell — the whole room reads as if carved from a single material.”
“On new builds it delivers a flawless, jointless finish that’s highly durable and crack-resistant — a reliable system that adds value across the board.”
“With over 10 years applying microtoppings, this is the strongest material I have used — a flawless, seamless finish every time.”
“Top-tier material with a true professional standard. Durable, seamless and built for long-term use.”
“A seamless, waterproof-ready surface with no grout lines — and the result has held up beautifully.”
A smarter way to renovate kitchens — without gutting the room.
Traditional kitchen renovations carry hidden costs: countertop demolition, tile tear-out, cabinet disruption, waste hauling, permit delays, and weeks without a working kitchen. Cement-based microcement can install over existing surfaces too, but introduces its own risks — shrinkage cracking, efflorescence, color shift during cure. TERRAZZO GraniTech avoids both paths.
Percentage savings hold across markets. Labor rates differ between South Florida, New York, Los Angeles and Chicago, but the relative advantage stays consistent — and the patented granite + resin chemistry is what makes the over-tile install possible at all. Building new? The same system installs on code-compliant substrates — one material from counter to ceiling. Request a sample to see the surface up close.
What you eliminate
The finishes
The hand writes the movement. The finish sets the grain.
Every TERRAZZO GraniTech finish arrives as a ready-to-use paste — and every one of them takes any movement. Troweled flat, it reads modern and mirror-calm. Moved loosely, it drifts like limewash. Worked boldly, it becomes artistic, sculptural texture. What you choose here is not the pattern — it’s the grain beneath it. The sealer sets the final note: matte, satin, or a subtle semi-gloss.
The surface
Depth built into the surface.
Color is the least of it. Beneath every movement your applicator writes, TERRAZZO GraniTech builds a dense, cement-free granite + resin body over your prepared counters, walls and floors — thin as a coin, sealed against spills and steam, engineered to keep the pattern exactly as the trowel left it. The pattern is yours. The permanence is built in.
The system
The kitchen build — over what you already have
-
SealerArmourcoat kitchen sealer Two coats in matte or satin — non-porous, stain-resistant and wipeable, from counter to ceiling.
-
Final coatDecorative final coat Color, texture and movement live here.
-
Build coatsTwo build coats Two structural coats that even the plane and carry the finish. Fine finishes ride on a Medium base coat.
-
MeshFiberglass mesh Bedded over the primed surface — the reinforcement layer that carries the build through the wet zone.
-
PrimerEco Grip Quartz primer Keys the system into your prepared surface.
-
BaseYour existing surfaces or substrate Existing tile, laminate, stone, drywall — even cabinetry and wood — or code-compliant board and concrete in new construction. Sound, clean and primed.
Project
Selected projects
Kitchens, residences and hospitality — counters, walls and floors finished in TERRAZZO GraniTech.
Questions
Frequently asked questions
Is TERRAZZO GraniTech a microcement alternative for kitchens?
Yes. It delivers the same seamless aesthetic with a granite-aggregate + acrylic resin matrix — more flexible than cement-based microcement, inherently water-resistant, and engineered for counters, walls and floors alike.
Can this go directly over my old countertop?
Yes — the requirement is simple: smooth and stable, with no flexing. Over tile, we degloss, close the grout joints with thinset, then apply fiberglass mesh and the quartz primer. Over an already-smooth top — concrete, marble, porcelain — no mesh is needed at all: degloss, prime, apply. Cabinets stay in place; nothing is torn out.
Can it handle heat?
Yes. Your counters get the same system we apply to floors — a build that lives under foot traffic — sealed with strong polyurethane sealers in wide commercial use.
Is it safe for food preparation?
Yes. These are low-VOC products throughout, and the polyurethane sealers that finish the surface are safe for kitchen use — non-porous, stain-resistant and wipeable.
What about the backsplash and walls?
The same surface runs from the counter up the backsplash and across walls and ceiling — one continuous, grout-free material with nowhere for grease or grime to lodge.
Can I use it in new construction or a full remodel?
Yes. It installs over code-compliant substrates — cement board, drywall, cured concrete and screeds — properly prepared and primed.
What surfaces can it be applied to?
Existing tile, laminate, stone, drywall, cement board, cured concrete — and cabinetry and wood — properly prepared and primed.
Support
With you every step of the way
Dedicated support across the full project — from choosing the right system and preparing your surface to application, sealing and finishing details. We can also match you with a trained installer near you.
Schedule a consultation
